Kate’s outfit, part 3: final fitting

Holy crap, how did this crop up so soon??! It’s only 2 weeks till the wedding now, so it’s the perfect time to have Kate try on the final garments and I can make a few tiny, almost imperceptible tweaks before I drop the perfected package back to her… or at least it would be, in a parallel universe where things work out just peachy the first time around.

But I don’t think I live in this peachy universe, because as it turned out I hit a few issues which meant showing Kate options to choose from, and of course that means I’ll have to implement the final choices after the fitting. Plus, as I was constructing the various pieces of this outfit it became increasingly obvious that the fabric was far too see-through. The facings and seam allowances were glowing through something chronic! But I decided to persevere, get a whole garment together to fit on Kate, and then find a solution to this issue along with any other changes we needed to make after.

So I knew we’d have a few alterations, some alternatives to switch in, and an opacity issue to nail… and I also knew I’d cut my two week contingency plan down to one week by booking a holiday. If I’m honest I wasn’t looking forward to this fitting.

That having been said, the outfit does look lovely 🙂 The design is perfect for her, the overall look of the thing is exactly what we wanted, and the alterations from the last fitting had gone well.

IMG_2244.JPG

I’d added a dart to the top to control the flare in the hem while keeping the fit at the bust, but I still made up the alternative top option (no darts, more flare). Darts are staying, fit looks nice 🙂 So that’s one set of options dealt with easily.

IMG_2245 (2).JPG

We’ve got a slight problem with a bumpy texture over the boobs, which is down to the seam allowance inside the corset layer needing a trim and possibly also some securing topstitches. And that’s another fairly simple win.

IMG_2244 (2)

IMG_2220.JPG

The skirt is sitting a little too low on the waist, leaving a slightly too big gap between top and skirt at the back. So there we’ll take in a little and it’ll sit higher, which is a wince more work but nothing too scary.

And then there’s the sleeve. I was disappointed to find that the darts felt bulky and left the hem a bit wobbly and chunky. It would be more normal to have a facing at the bottom sleeve, so there would be darts on the outside layer but not on the inside layer, just a smooth panel which attaches to the lining, but Kate really wanted the inside to also be in self fabric with no seams to show through, just an exact copy of the outer layer. So I made her up one sleeve as planned, but I made an alternative sleeve with the shaping from the darts moved into one convex shaped panel, so we have a horizontal seam instead. I thought the look would be cleaner, but maybe it got a little too stark.

IMG_2255 (2).JPG

IMG_2252

After some discussion we decided to continue with the original darted design. Kate felt that it could do with a bit less volume in the bottom though, so we pinned quite a bit away. I’ll update the pattern accordingly and make up a pair of these new sleeves. We won’t see them on Kate for any more test rounds though, so let’s hope the smaller silhouette isn’t too risky at this late stage!

But the biggest issue to my eyes is the transparency. It’s tolerable, I suppose – she can wear virtually invisible pants and maybe in most of the photos you won’t see the facings – but that seems like a bit of a cop out. Up close the seam allowances look super ugly and the facings are not exactly offensive but shouldn’t be a feature! Instead of tolerance I’m going to take action. I’ll get some more fabric, fuse it, re-cut and replace the outer layer of the skirt and the top. For the sake of an extra days’ work I think it’ll be a vast improvement.

Plus it’ll be less inclined to relax into her butt crack.

 

IMG_2240

 

Quite a few more things to do then, and not such a long time to do them in! I’ve called in my long suffering assistant (thanks mum) and written a list: it’ll be wrapped up and in the brides’ hand by Friday lunchtime.

So the next time we all see this project will be in the wedding photos!! Good luck on your big day Kate, and don’t forget to remove those sleeves before the soup course 😉 xx

 

Kate’s outfit, part 2: first fitting

Last week I drafted the patterns for Kate’s design, made up the first toile, and on Saturday she came over for our first fitting. I was super excited to work on it with her! But to be honest I’d gotten into my own head a bit on this one and was worried it wouldn’t match her expectations. As it turned out, Kate was happy as a clam and felt like I was well on the right track…

Sarah Barker bridal | first toile off shoulder top and skirt | Kate

This outfit breaks down into 3 main elements: the boned bodice, the sleeved top, and the skirt. I started with the bodice, using the Helen Joseph-Armstrong book, Pattern Making for Fashion Design, to make a fitted top from my basic block. This part won’t really be on show, but it’s job is to provide a strong structure sitting on the hips and holding the top edge of the sleeveless top exactly where we want it to be.

Sarah Barker bridal | boned bodice top | Kate

I was worried that the fit on this might not be nice because the curve over the bust is a bit exaggerated and fembot-esque, but I can smooth that out on the pattern and then there are just a few tweaks needed to get that top edge completely perfect. The diagonal boning in the front panels had the desired effect and will the give sleeves a good, solid base to sit on top of.

For the sleeved top layer I draped the body panels straight on the stand. We want this to stand away from the body a bit, so the easiest method for me is to just be hands-on! And then I based the sleeve on a top of Kates’ which she likes the dimensions of, so a nice, quick starting point 🙂

For this toile I didn’t attach the sleeved top to the bodice, because I didn’t want that in the way when I was fitting the underneath layer, but ultimately I will make them into one garment… Except for the sleeves which will be detachable! A brilliant addition to the design which I couldn’t have been more pleased to have Kate suggest.

Sarah Barker bridal | off shoulder top fabric experiment | Kate

Also, this toile has sleeves in 2 different fabrics, which is not a permanent design feature!  The white sleeve on the left is in a structured silk fabric from Silk Society in Soho which we’d both really liked in the store – it has great body in one direction but drape in the other so we felt we could do a lot with it. But I’m glad we did this trial, because it soon became evident that it just wasn’t working for us! It gives a cowl effect which just doesn’t look as nice as the calico side, so we’re going back to the drawing board. We also like a much simpler cotton silk mix from Whaleys which could be very versatile and give us a lot more options in combination with fusings, so we’ll have a play with that one next.

Sarah Barker bridal | off shoulder top toile | Kate

We hadn’t wanted an opening in the back originally, but this turned out to be the best fastening solution. We can make the corset body with a zip at centre back and then the top part will have a split here. It was actually a feature on one of the tear sheet images Kate brought to me, so it doesn’t feel like a compromise design-wise. Initially my toile had an asymmetric hem, but that just didn’t work, so during the fitting we have levelled it up.

Sarah Barker bridal | off shoulder top | Kate

For the skirt, I draped on the stand to make a very simple block version of our skirt design, which I then altered for Kate’s measurements in the flat pattern. We’d left this part of the design pretty open ended, so I just wanted to keep the toile as basic as possible for us to project our ideas onto in the fitting.

Sarah Barker bridal | off shoulder top and straight train skirt | Kate

Kate liked the wide slit which is necessary if we cut the front in only one panel. We’ll make the top shape rounded to make a nicer finish here, and I think it’ll be a cute feature. And ultimately this split feature has one very important job to do: to flash Kate’s fairly mental shoes.

Sarah Barker bridal | high slit skirt | Kate

The size of the train I’d put on here was a total guess, but it suited Kate well and we’re going to stick with it as it is. The skirt will have a centre back panel at the next stage though, which goes to a point towards the top of the thigh.

IMG_1932

So my next stage for Kate is to make a new pattern with all the changes and make new garments ready for a second fitting. As we’ve now decided to try out a cotton silk from Whaleys, which isn’t too pricey, I think it’d be great to go ahead and start to make up the next stage in the real fabric! If there are some elements we don’t like and want to remake we can do that quite inexpensively, and if some parts are perfect already then we can save Kate some money by using that for the real thing. I’ll use a 1.5cm wide seam allowance and treat it like a couture garment, altering the garment itself rather than doing a lot of pattern stages.